Duraplate uhs data sheet. A two-component, 100% solids, high-build, high-strength reinforced apply lining. Designed for concret and steel in severe service environments including splashzone areas on offshore platforms, wharf piles, jetties, chemical plants, pulp and paper mills and water treatment plants. Dura-Plate® 6000 delivers rapid return-to-service times and the ...

When it comes to cleaning and disinfecting, Clorox is one of the most trusted brands. But when it comes to storing and handling Clorox, it’s important to make sure you’re doing so ...

Duraplate uhs data sheet. Fast-Clad® ER Epoxy. Epoxy with Opti-Check OAP Technology Engineered for immersion service in sea water ballast tanks, fuel/sea water ballast tanks and petroleum storage tanks, Fast-Clad® ER Epoxy provides superior protection compared to conventional epoxies thanks to its rapid-return-to-service and high-build, edge-retentive properties.

DURA-PLATE® UHS Epoxy Primer (Part A) Buff Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::

Dura-Plate 301 is an excellent surface and humidity anti-corrosive epoxy, formulated for application over marginally prepared surfaces. Apply over wet surfaces. Apply over flash-rust (WJ2M – SSPC VIS4) Can be applied over existing coatings. Standard airless, brush or roller application. Excellent adhesion – up to 25 MPa (3625 PSI).Safety Data Sheet - Part A (236.49 kB) Safety Data Sheet - Part B (179.00 kB) System Info - Project Job Sheet (89.24 kB) Related Products. Sherwin Williams Transgard TG111V2 - Formerly Leighs. ... Sherwin Williams Dura-Plate UHS Epoxy Tank Lining. A rapid return to service, high build, edge retentive tank lining for prepared steel or concrete ...

A two-component, PFTE, inert, flake-reinforced novolac tank lining. Nova-Plate® 360 can be applied by single-leg airless or plural-component airless application with return to service times in as little as 24 hours. It has excellent abrasion resistance and it incorporates Optical Activated Pigment (OAP) technology to improve the accuracy and ... NOTE: Dura-Plate UHS may be applied at alternate thicknesses, up to 50 mils (1,250 microns), depending on application conditions. Consult your Sherwin-Williams representative for ... to obtain the most recent Product Data Sheet. DURA-PLATE® UHS EPOXY TANK LINING. Title: Dura-Plate UHS_1301-1.indd Author: dxg719 Created Date:Standard hardener preferred for brush & roll due to pot life. Shelf Life: 24 months, unopened Store indoors at 40°F (4.5°C) to 100°F (38°C). Flash Point: >230°F (110°C), PMCC, mixed Reducer: Not recommended. with standard hardener 55°F (13°C) 77°F (25°C) 50% RH 50% RH. Touch: 15 hours 4 hours Handle: 36 hours 14 hours.Dura-Plate® 8200 High Temperature Epoxy Part A, Gray MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 W. Prospect Avenue Cleveland, OH 44115 This document includes all data required by 40 CFR 63.801(a) for a Certified Product Data Sheet under criteria specified in 40 CFR 63.805(a).In today’s digital age, data entry has become an essential skill in various industries. Accuracy and speed are crucial when it comes to processing large amounts of information. To ...DURA-PLATE® 6000 Reinforced Epoxy (Part A) White Not available. ... (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Manufacturer …Surface Preparation: BS EN ISO 8501-1 2007 Sa21⁄2. System Tested: 1 ct. Dura-Plate UHS @ 450 microns dft. Test Name Test Method Results Abrasion Resistance ASTM D4060-14, CS17 wheel, 1000 20.8 mg loss cycles, 1 kg load.linings, such as Sherwin-Williams Poly-Cote™ 115, Dura-Plate® 6100, Dura-Plate® 6000 and Dura-Plate® UHS, requires a relatively uniform dry film thickness to resist drying shrinkage and thermal movement of the concrete, while maintaining a seamless bridge or seal over the concrete. Therefore, it is critical that all mortar splatter, A two-component, ultra high-solids novolac amine epoxy tank lining. Nova-Plate® UHS Epoxy is engineered specifically for immersion service in ballast tanks, oil tanks, refined fuel storage tanks, and for well deck overheads. Interested in learning more or purchasing this product?

Sherwin-Williams Dura-Plate UHS is a fast curing solvent free epoxy lining coating which rapid return to service and high build, edge retentive properties of tank lining provides superior protection compared to conventional approaches or alternative products. Dura-Plate UHS is the user friendly solution for use in tanks containing a wide range of …DuraPlate UHS Epoxy . PRODUCT DESIGNATIONS . Part A: B62W210, B62AW210, B62BW210, B62GV210, B62AV210, B62V210 . MIL-PRF-23236 . If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL. This NAVSEA-REVIEWED ASTM F-718 data sheet is the only data sheet …Formulated specifically for immersion and atmospheric service in marine and industrial environments, Dura-Plate® 235 Multi-Purpose Epoxy provides exceptional performance in corrosive environments and can be applied at temperatures as low as 0°F (-18°C).linings, such as Sherwin-Williams Poly-Cote™ 115, Dura-Plate® 6100, Dura-Plate® 6000 and Dura-Plate® UHS, requires a relatively uniform dry film thickness to resist drying shrinkage and thermal movement of the concrete, while maintaining a seamless bridge or seal over the concrete. Therefore, it is critical that all mortar splatter,

Shelf Life: 36 months, unopened Store indoors at 40°F (4.5°C) to 100°F (38°C). DURA-PLATE UHS is an ultra high solids epoxy amine engineered spe-cifi cally for use as a laminating system in immersion service in ballast tanks, oil tanks, and refi ned fuel storage tanks.

PRODUCT DATA SHEET. DURA-PLATE® UHS. EPOXY TANK LINING. Revised: June 9, 2023. PRODUCT DESCRIPTION. DURA-PLATE UHS is an ultra-high solids, edge retentive epoxy with proven long term performance as a lining for bulk storage tanks, ballast tanks, pipe internals and secondary containment. Applied using normal or plural airless spray. INTENDED USES.

DURA-PLATE® UHS EPOXY. Sherwin-Williams Protective & Marine Coatings Dura-Plate® UHS Epoxy. Description. Dura-Plate® UHS is an ultra high solids epoxy amine engineered specifically for immersion service in ballast tanks, oil tanks, and refined fuel storage tanks.Managing and tracking expenses is an essential aspect of personal and business finance. It allows individuals and organizations to gain a clear understanding of their spending patt... Recommended in immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS Primer is formulated specifically as a primer for use under Dura-Plate UHS topcoat. The primer provides excellent surface wetting and adhesion properties, especially over rust pitted steel surfaces. Dura-Plate UHS Sher-Plate PW *Maximum of 28.0 mils (700 microns) for entire system The systems listed above are representative of the product's use, other systems may be appropriate. D (2 " + (, $ 1 The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams ...Excel is a powerful tool that allows users to organize and analyze data efficiently. One of the most useful features of Excel is its ability to perform complex calculations using f...

Back Safety Data Sheets Back Para Los ... DURA-PLATE UHS Epoxy (Part B) {{ ctrl.bvAvgRatingForScrReaders }} Star rating out of 5DURA-PLATE 6000 is a 100% solids, high build, high strength, reinforced epoxy lining for concrete, steel and iron in severe service environments including splashzone areas on off shore platforms, wharf piles, jetties, chemical plants, pulp and paper mills and water treatment plants.PRODUCT DESCRIPTION. DURA-PLATE UHS is an ultra-high solids, edge retentive epoxy with proven long term performance as a lining for bulk storage tanks, ballast tanks, pipe internals and secondary containment. Applied using normal or plural airless spray.Surface Preparation: BS EN ISO 8501-1 2007 Sa21⁄2. System Tested: 1 ct. Dura-Plate UHS @ 450 microns dft. Test Name Test Method Results Abrasion Resistance ASTM D4060-14, CS17 wheel, 1000 20.8 mg loss cycles, 1 kg load.DURA-PLATE® 235 Multi-Purpose Epoxy (Part A) Haze Gray Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::Dura-Plate 301 is an excellent surface and humidity anti-corrosive epoxy, formulated for application over marginally prepared surfaces. Apply over wet surfaces. Apply over flash-rust (WJ2M – SSPC VIS4) Can be applied over existing coatings. Standard airless, brush or roller application. Excellent adhesion – up to 25 MPa (3625 PSI).DURA-PLATE® UHS Epoxy (Part A) OAP White Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Manufacturer …DURA-PLATE® UHS Epoxy (Part A) White Base Not available. Liquid. +1 703-741-5970 SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Relevant identified uses of the substance or mixture and uses advised against Not applicable. B62W210 …Surface Preparation: BS EN ISO 8501-1 2007 Sa21⁄2. System Tested: 1 ct. Dura-Plate UHS @ 450 microns dft. Test Name Test Method Results Abrasion Resistance ASTM D4060-14, CS17 wheel, 1000 20.8 mg loss cycles, 1 kg load.DURA-PLATE® UHS Epoxy (Part B) - Hardener - Clear Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II B62V210 DURA-PLATE® UHS Epoxy (Part B) - Hardener - Clear SAFETY DATA SHEET Product name: 1.1 Product identifier 1.3 Details of the supplier of the safety data sheet e-mail address of person responsible for this …An ultra-surface and moisture-tolerant high-solids epoxy coating, Dura-Plate® 301K is engineered to provide outstanding adhesion and anti-corrosion performance over a wide range of surface preparation …PRODUCT DESCRIPTION. DURA-PLATE UHS is an ultra-high solids, edge retentive epoxy with proven long term performance as a lining for bulk storage tanks, ballast tanks, pipe internals and secondary containment. Applied using normal or plural airless spray.2 Cts. Nova-Plate UHS 10.0-12.0 (250-300) Steel, Immersion & Atmospheric 1 Ct. Nova-Plate UHS 15.0-35.0 (375-875) NOTE: Nova-Plate UHS may be applied at alternate thicknesses, up to 60 mils (1,500 microns), depending on application conditions. Consult your Sherwin-Williams representative for additional information.DURA-PLATE® UHS Epoxy (Part B) Hardener - Clear Not available. Liquid. US / Canada: (216) 566-2917 Mexico: SETIQ 01-800-00-214-00 / (52) 55-5559-1588 24 hours / 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::Mar 25, 2024 · Dura-Plate UHS Primer. A two-component, ultra high-solids epoxy amine. Recommended in immersion service in ballast tanks, oil tanks and refined fuel storage …Sherwin-Williams Protective & Marine Coatings launched Dura-Plate 6000, a new 100 percent solids, high-build, high-strength, reinforced epoxy lining for concrete and steel in severe wastewater service environments. The durable lining material offers asset owners and applicators a variety of time and cost efficiencies due to its fast return-to …Material safety data sheets (MSDS) list potential hazards associated with chemicals and other products, and they tell users and safety personnel how to work safely around those ite...Dura-Plate UHS Sher-Plate PW *Maximum of 28.0 mils (700 microns) for entire system The systems listed above are representative of the product's use, other systems may be appropriate. D (2 " + (, $ 1 The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams ...

Dura-Plate UHS is suitable for application through normal airless spray equipment. Available air pressure and capacity of spray equipment should be at least 5.0kg cm-2 and 7.0m3 per minute (70 p.s.i. and 250 c.f.m.). Airless spray equipment should be in good working order.Dura-Plate® UHS Primer. Dura-Plate® UHS PRIMER is an ultra high solids epoxy amine formulated specifically as a primer for use under Dura-Plate® UHS topcoat. For use in immersion service in ballast tanks, oil tanks, and refined fuel storage tanks. Dura-Plate® UHS Primer provides excellent surface wetting and adhesion properties, especially ...Excel is a powerful tool that allows users to organize and analyze data efficiently. One of the most useful features of Excel is its ability to perform complex calculations using f...This NAVSEA- REVIEWED ASTM F -718 data sheet is the only data sheet approved for use when utilizing this coating for U.S. Navy preservation projects. NAVSEA‘s review covers only the ... Brush coat touch up and stripe coating may be accomplished using DuraPlate UHS (primer or topcoat), NovaPlate UHS (primer or topcoat), or EuroNavy ES301K ...1 ct. Dura-Plate 2300 as needed to fi ll surface imperfections 1 ct. (Optional) Primer as defi ned above 1 ct. Dura-Plate 6000 60.0-125.0+** (1,500-3,125) ... The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company.Back Safety Data Sheets Back Para Los ... DURA-PLATE UHS Ultra High Solids N Epoxy (Part A) {{ ctrl.bvAvgRatingForScrReaders }} Star rating out of 5DURA-PLATE® UHS Epoxy (Part A) OAP Blue Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Manufacturer …

A two-component, ultra high-solids epoxy amine. Recommended in immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS Primer is formulated specifically as a primer for use under Dura-Plate UHS topcoat. The primer provides excellent surface wetting and adhesion properties, especially over rust pitted steel ... Jun 7, 2023 · This application guide must be read in-conjunction with the relevant specification, technical data sheet (TDS) and safety data sheet (SDS). Contractors …Sherwin Williams Dura-Plate UHS Epoxy 20L. Sherwin Williams Dura-Plate UHS Epoxy Tank Lining. £ 319.90. £ 383.88 (inc. VAT) Add to your Wish List. You can earn 383 loyalty points with this purchase. Description. Sherwin Williams Dura-Plate UHS is a rapid return to service, edge retentive tank lining with a high build,for prepared steel or ... DURA-PLATE® UHS Epoxy Primer (Part A) Gold Not available. Liquid. US / Canada: (216) 566-2917 Mexico: SETIQ 01-800-00-214-00 / (52) 55-5559-1588 24 hours / 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Manufacturer : THE SHERWIN ... A two-component, high-solids, high-build amine epoxy coating. Capable of withstanding extreme conditions of abrasion and corrosion, Dura-Plate® 154 Epoxy Splash Zone Coating can be applied from 10-40 mils (250-1000 microns) dry in one coat, as well as over prepared, damp substrates while providing adequate adhesion and a protective film. This UHS lining is suitable for low-temperature applications and cures at 25°F (-3°C). Fast-Clad ER’s formulation is balanced to maintain required application properties over a range of film thicknesses and edge retention (>70%). Plural application equipment is required to apply Fast-Clad ER due to the product’s material characteristics.Dura-Plate® 154. A two-component, high-solids, high-build amine epoxy coating. Capable of withstanding extreme conditions of abrasion and corrosion, Dura-Plate® 154 Epoxy Splash Zone Coating can be applied from 10-40 mils (250-1000 microns) dry in one coat, as well as over prepared, damp substrates while providing adequate adhesion and a … 2 Cts. Nova-Plate UHS 10.0-12.0 (250-300) Steel, Immersion & Atmospheric 1 Ct. Nova-Plate UHS 15.0-35.0 (375-875) NOTE: Nova-Plate UHS may be applied at alternate thicknesses, up to 60 mils (1,500 microns), depending on application conditions. Consult your Sherwin-Williams representative for additional information. DURA-PLATE® 6000 Reinforced Epoxy (Part A) White Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: A two-component, ultra high-solids epoxy amine. 1 day ago · PRODUCT DATA SHEET. DURA-PLATE® UHS. EPOXY TANK LINING. Revised: June 9, 2023. PRODUCT DESCRIPTION. DURA-PLATE UHS is an ultra-high …Description. Dura-Plate® UHS is an ultra high solids epoxy amine engineered specifically for immersion service in ballast tanks, oil tanks, and refined fuel storage tanks. The high …Mar 25, 2024 · Dura-Plate UHS Primer. A two-component, ultra high-solids epoxy amine. Recommended in immersion service in ballast tanks, oil tanks and refined fuel storage …Dura-Plate® 7550. A two-component, epoxy phenolic lining. A high solids, flexible coating, Dura-Plate® 7550 is designed to protect product purity across a broad range of cargos during loading, unloading, transport, and storage in rail cars and fixed site storage tanks. ... Data Sheets; Product Overview Benefits Ambient temperature cure;AS MIXED (as per product data sheet): DURA-PLATE* UHS Ultra High Solids Epoxy (Part A) AS MIXED Product Weight 10.56 lb/gal Specific Gravity 1.27 FLASH POINT 20 °F TCC Volatile Ingredients Chemical / Compound SARA 302 EHS CERCLA SARA 313 TC HAPS 112 % by Weight % by Volume Phenylmethanol 100-51-6 N N N N 9 11 Regulated … DURA-PLATE® UHS Epoxy (Part B) Green Hardener B62GV210 Liquid. 1-216-566-2917 (US) / +(61)290372994 (AUS) SAFETY DATA SHEET Product identifier Product code Product type Emergency telephone number (with hours of operation) Section 1. Identification:::: Supplier's details :The Sherwin-Williams Company 101 W. Prospect Avenue Cleveland, OH 44115 The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company. Such information and recommendations set forth herein are subject to change and pertain to the product offered at the time of publication. ... DURA-PLATE UHS is an ultra high solids epoxy amine ...DURA-PLATE® UHS Epoxy (Part B) Hardener - Clear Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::Dura-Plate UHS superior performance results from the combination of an advanced amine curing system with the perfectly engineered film rheology. The curing concept provides high chemical resistance and excellent barrier properties. The rheology allows enhanced edge retention features which maximise the coverage of edges and weld areas.

A two-component, ultra high-solids epoxy amine. Recommended in immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS Primer is formulated specifically as a primer for use under Dura-Plate UHS topcoat. The primer provides excellent surface wetting and adhesion properties, especially over rust pitted …

Established in 1985, the company specializes in the design and production of dry freight vans, refrigerated vans, platform trailers, intermodal equipment, liquid tank trailers, engineered products, and composite products. Contact information: 866-877-5062. [email protected] wabashnational.com.

Dura-Plate UHS Primer provides excellent surface wetting and adhesion properties, especially over rust pitted steel surfaces. NSF approved to Standard 61/600 for potable water (tanks of 1000 gallons or greater and pipes of 40" diameter or greater.) Material should be at least 50°F (10°C) for optimal performance.Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600. Sherwin-Williams Company. 101 Prospect Avenue. Cleveland, OH 44115. United States. 773-821-3420. Facility : Victorville, CA.Jun 7, 2023 · This application guide must be read in-conjunction with the relevant specification, technical data sheet (TDS) and safety data sheet (SDS). Contractors …A low-temperature application and curing version of our Dura-Plate® 301K ultra-surface and moisture-tolerant high-solids epoxy coating platform, Dura-Plate® 301W may be applied at ambient and substrate temperatures as low as 35°F (2°C). It is engineered to provide outstanding adhesion and anti-corrosion performance over a wide range of ...A two-component, amine-cured, glass-and ceramic-filled tank lining that utilizes advanced novolac technology. Utilizing advanced novolac technology, Nova-Plate® 325 is engineered to protect cargo and steel tank and vessel interiors from aggressive chemicals stored and processed at high temperatures and high pressures.A two-component, high-build, 100% solids epoxy. Used to protect concrete and steel surfaces in immersion and atmospheric exposure, Dura-Plate® 5900 is designed for corrosion protection in municipal and industrial wastewater treatment facilities, especially where a high-build coating is required. Interested in learning more or purchasing this ...A two-component, ultra high-solids epoxy amine. Engineered specifically for use as a laminating system in immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS Clear Laminate provides superior protection through its high-build properties as compared to conventional epoxies.Epóxico Dura-Plate UHS. Es un epóxico amina de ultra altos sólidos diseñado específicamente para inmersiones en tanques de lastre, tanques de aceite y tanques de almacenaje de combustible refinado. Las propiedades de alto espesor y protección de bordes de Dura-Plate UHS proveen protección superior comparado con epóxicos …

what is the abex procedurehow to grind with buddha fruithow tall is lori pinsoncalculate tolls ny Duraplate uhs data sheet jeff doucet shooting video [email protected] & Mobile Support 1-888-750-7906 Domestic Sales 1-800-221-9296 International Sales 1-800-241-7595 Packages 1-800-800-7535 Representatives 1-800-323-6220 Assistance 1-404-209-2308. PDS Dura-plate UHS Primer - Issue 3.indd. PRODUCT DESCRIPTION. RECOMMENDED USES. For use over prepared steel or concrete surfaces in industrial and marine exposures such as: Meets MIL-PRF-23236, Type VII, Class 5, 7, 9 and 11, Grade C. Ballast tank interiors. Potable water tanks and pipes (Certifi ed to NSF/ANSI 61) Oil storage tank interiors .... bluey oc maker DURA-PLATE® UHS Epoxy (Part A) White Base B62W210 Liquid. 1-216-566-2917 (US) / +(61)290372994 (AUS) SAFETY DATA SHEET Product identifier Product code Product type Emergency telephone number (with hours of operation) Section 1. Identification:::: Supplier's details :The Sherwin-Williams Company 101 W. Prospect Avenue Cleveland, OH 44115 DURA-PLATE 6000 is a 100% solids, high build, high strength, reinforced epoxy lining for concrete, steel and iron in severe service environments including splashzone areas on off shore platforms, wharf piles, jetties, chemical plants, pulp and paper mills and water treatment plants. my cvs com passwordwyandotte city wide garage sale 2023 NOTE: Dura-Plate UHS may be applied at alternate thicknesses, up to 50 mils (1,250 microns), depending on application conditions. Consult your Sherwin-Williams representative for ... to obtain the most recent Product Data Sheet. DURA-PLATE® UHS EPOXY TANK LINING. Title: Dura-Plate UHS_1301-1.indd Author: dxg719 Created Date: morehead ky jailjackson county adc center New Customers Can Take an Extra 30% off. There are a wide variety of options. DURA-PLATE 5900 is a high build, 100% solids epoxy designed for corrosion protection of concrete and steel in municipal and industrial wastewater treatment facilities, especially where a high build coating is required. 100% solids. Resistant to water and wastewater treatment immersion.Back Safety Data Sheets Back Para Los ... DURA-PLATE UHS Epoxy (Part B) {{ ctrl.bvAvgRatingForScrReaders }} Star rating out of 5Sherwin-Williams is dedicated to superior product stewardship and workplace safety. Globally Harmonized System - Safety Data Sheets (GHS-SDS), Product Data Sheets (PDS), and Environmental Data Sheets (EDS) are available for all Sherwin-Williams professional paint products and outline technical specifications, specific ingredient composition ...